ZYNOLYTE PRODUCTS CO -- SPEED-E-NAMEL -- 8010-00N006431
===================== Product Identification =====================
Product ID:SPEED-E-NAMEL
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006431
=== Responsible Party ===
Company Name:ZYNOLYTE PRODUCTS CO
Emergency Phone Num:213-604-1333
CAGE:25461
=== Contractor Identification ===
Company Name:ZYNOLYTE PRODUCTS CO
Address:2320 E DOMINGUEZ ST
Box:6244
City:CARSON
State:CA
ZIP:90749
Country:US
Phone:310-513-0700
CAGE:25461
============= Composition/Information on Ingredients =============
Ingred Name:METHYLENE CHLORIDE (SARA III)
CAS:75-09-2
RTECS #:PA8050000
Fraction by Wt: 42%
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ingred Name:ALIPHATIC HYDROCARBON
Fraction by Wt: 9%
ACGIH TLV:150 PPM (MFR)
Ingred Name:AROMATIC HYDROCARBON SOLVENT
Fraction by Wt: 2%
ACGIH TLV:200 PPM (MFR)
Ingred Name:ISOBUTANE PROPANE PROPELLENT
Fraction by Wt: 33.5%
===================== Hazards Identification =====================
Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,TAKE TO PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CALL
PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:FLAME EXTEN: 28"
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:PRESSURIZED PRODUCT,EXPOSURE TO HIGH HEAT
MAY CAUSE BURSTING.
================== Accidental Release Measures ==================
Spill Release Procedures:N/A (MFR)
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:86.5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP ABOVE 120F/48C
==================== Disposal Considerations ====================
Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE OR PUNCTURE CANS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.