=====================  Product Identification  =====================

Product ID:ER 60 MEDIUM ENAMEL REDUCER Q16CR011
MSDS Date:05/28/1987
FSC:8010
NIIN:00F009750
MSDS Number: BHLNF
=== Responsible Party ===
Company Name:BASF CORPORATION INMONT DIVISION
Address:6125 INDUSTRIAL PARKWAY
Box:2757
City:WHITEHOUSE
State:OH
ZIP:43571
Info Phone Num:(419) 877-5308
Emergency Phone Num:(419) 877-5308
Preparer's Name:B. M. RICHARDS
CAGE:0PK40
=== Contractor Identification ===
Company Name:BASF CORP HDQTS
Address:19855 W OUTER DR STE 401 E
City:DEARBORN
State:MI
ZIP:48124-5000
Country:US
Phone:419-877-5308/800-832-HELP
CAGE:70526
Company Name:BASF CORPORATION
Address:100 CHERRY HILL ROAD, BLDG 119-2
City:PARSIPPANY
State:NJ
ZIP:07054
Country:US
Phone:201-316-3000 OR 800-424-3900
CAGE:0PK40

=============  Composition/Information on Ingredients  =============

Ingred Name:VM&P NAPHTHA (LIGROINE)
CAS:8032-32-4
RTECS #:OI6180000
Other REC Limits:STEL 400 PPM
OSHA PEL:300 PPM/400 STEL
ACGIH TLV:300 PPM; 9192

Ingred Name:VOL ORGANIC CMPD: (#/GAL): 6.74
RTECS #:9999999VO

Ingred Name:MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100)
CAS:64742-88-7
Other REC Limits:100 PPM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:ISOBUTYL ACETATE  (SARA III)
CAS:110-19-0
RTECS #:AI4025000
Other REC Limits:150 PPM
OSHA PEL:150 PPM
ACGIH TLV:150 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Other REC Limits:100 PPM
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC. IRRITATION OF
    RESPIRATORY, NERVOUS SYSTEM DEPRESSION, HEADACHES, LOSS OF
    CONSCIOUSNESS. INGESTION: GASTROINTESTINAL IRRITATION INCLUDING
    VOMITING CAN OCCUR. ASPIRATION OF MATER IAL INTO LUNGS MAY RESULT
    IN CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. SKIN/EYE: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS
    CAUSES PERMANENT CENTRAL NERVOUS SYSTEM DEPRESSION. INTENTIONAL
    MISUSE BY DELIBERATELY CONCENTRATING & INHALATING THE CONTENTS CAN
    BE HARMFUL OR FATAL. OVER EXPOSURE TO DECOMPOSITION, PRODUCTS
    MAYCAUSE A HEALTH HAZARD W/NO SYMPTOMS APPARENT. EYE/SKIN:
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: RESTORE BREATHING. REMOVE TO FRESH AIR. KEEP WARM
    & QUIET. NOTIFY A PHYSICIAN. EYE: FLUSH W/COPIOUS AMOUNTS OF
    RUNNING WATER FOR AT LEAST 15 MINS. TAKE TO PHYSICIAN FOR
    DEFINITIVE MEDICAL	TREATMENT. SKIN: CLEAN & WASH AFFECTED AREA
    W/WATER. CONSULT PHYSICIAN. INGESTION: DON'T INDUCE VOMITING. CALL
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:23-32F
Lower Limits:0.5%
Upper Limits:7.6%
Extinguishing Media:FOAM, CO2, CHEMICAL POWDER
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT/SCBA. WATER SPRAY
    MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE USED TO COOL CLOSED
    CONTAINERS TO PREVENT PRESSURE BUILD-UP, & EXPLODE WHEN EXPOSED TO
    EXTREME HEAT. KEEP CONTAINER TIGHTLY CLOSED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE ALL POSSIBLE SOURCES OF
    IGNITION. CONFINED SPILL W/INERT ABSORBENT & CLEAN UP WITH
    SPARK-PROOF TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. WHEN STORING LARGE
    QTYS, STORE IN BLDG DESIGNED/PROTECTED AGAINST FLAMMABLE LIQUIDS.
    FOR INDUSTRIAL USE ONLY.
Other Precautions:USE STATIC LINES WHEN MIXING/TRANSFERRING MATERIAL.
    DON'T ALLOW MATERIAL TO FREE FALL MORE THAN 5 INCHES. DON'T TAKE
    INTERNALLY. DON'T FLAME CUT, WELD, OR BRAZE ON COATED METAL W/OUT A
    NIOSH/MSHA TC23 C RESPIRATOR. AVOID BREATHING OF VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA TC23C CHEMICAL/MECHANICAL TYPE
    FILTER SYSTEM TO REMOVE A COMBINATION OF PARTICLES, GAS & VAPORS.
    USE AIR LINE IF NECESSARY.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION TO KEEP AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:100%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACID, ALKALIES, & OXIDIZERS
Stability Condition to Avoid:HOT SURFACES, HEAT, OPEN FLAMES, STATIC
    DISCHARGE, ELECTRICAL EQUIPMENT, & SPARKS.
Hazardous Decomposition Products:CO2, CO & SMOKE. COMBINATION OF
    PARTICLES, GAS & VAPORS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
    FEDERAL REGULATIONS. LAND FILL OR INCINERATE IN APPROVED FACILITY
    BY LICENSED CONTRACTOR. DON'T INCINERATE IN CLOSED CONTAINER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.